客服
中
心
| MIPI M-PHY Gear 4 IP in TSMC 12nm FFC | 参考报价 | 无资料 | 11 GHz | 12 nm |  |
|
| MIPI M-PHY Gear 4 IP is compliant with the latest MIPI. Alliance M-PHY v4.1 Specification, UniPro v1.8 Specification, and Universal Flash Storage (UFS) v3.0 Specification. A serial interface technology with high bandwidth capabilities and supports HS Gear4 rates up to 11.6Gbps, which is particularly developed for mobile applications to obtain low pin count combined with very good power efficiency. The MIPI M-PHY Gear 4 IP compliant to the RMMI interface which allows UniPro controller and UFS Controller. | 概述 | |||||
| 12-Bit 320MSPS IQ DAC in IBM SOI 180nm | 参考报价 | 254.000 K μm^2 | 320 MHz | 180 nm | |
|
| MIC_DAC12X2 is compact and low power 12-bit digital-to-analog converter silicon IP in IBM 180nm SOI process. It features two channel current steering DAC. | 概述 | |||||
| 14-Bit 1MSPS DAC in GSMC110nm | 参考报价 | 75.000 K μm^2 | 1 MHz | 110 nm | |
|
| MIC_DAC14 is compact and low power 14-bit digital-to-analog converter silicon IP. It features wide range input supply voltage from 1.7V to 5.6V. Its single-end output ranges from 0.1 to 0.9 of supply voltage. | 概述 | |||||
| 300 mA Capless LDO in 180 nm (VLDS0300RNM180) | 参考报价 | 无资料 | 无资料 | 180 nm | |
|
| Noise Quencher® Capless LDO (Silicon-proven 180 nm, 300 mA, excellent supply noise rejection and fast settling) Noise Quencher® LDOs: This series of low-power, fully-integrated low dropout (LDO) voltage regulators uses our patented Noise Quencher® Technology to provide best-in-class dynamic performance and noise rejection. The IP cores are unconditionally stable across a wide range of load currents and load capacitances and also do not require external components, thus saving package pins and valuable PC board space. These LDOs are optimized for stand-alone power management integrated circuit (PMIC) ASSPs and other analog and digital applications. | 概述 | |||||
| 14-Bit 3 MSPS ADC in GSMC110nm | 参考报价 | 322.000 K μm^2 | 3 MHz | 110 nm | |
|
| MCR_GS110_ADC14 is compact and low power 14-bit analog-to-digital converter silicon IP. It has 20 single-end input channel selection multiplexer or 10 differential input channels selection. This ADC uses fully differential SAR architecture optimized for low The ADC is designed for high dynamic performance for input frequencies up to Nyquist rate. | 概述 | |||||
| 300 mA Capless LDO in 130 nm (VLDS0300LS130) | 参考报价 | 无资料 | 无资料 | 130 nm | |
|
| Power Quencher® Capless LDO (Silicon-proven 130 nm, 300 mA, excellent quiescent current and load transient regulation) The Power Quencher® series of fully-integrated low dropout (LDO) voltage regulators operates with ultra-low levels of power consumption without sacrificing other areas of performance. They achieve a low-noise output voltage and do not require the external output capacitor that is typically needed in an LDO for loop stability and noise reduction. This saves component count, board space and cost, and improves overall system reliability. The Power Quencher® LDO voltage regulator IP cores are optimized for integration into Application Specific Integrated Circuits (ASICs) or Systems-on-a-Chip (SoCs), including radio frequency (RF), wireless, and Internet of Things (IoT) applications. | 概述 | |||||
| 400 mA Buck DC-DC Converter in 110 nm (VBKS0400T110) | 参考报价 | 无资料 | 无资料 | 110 nm | |
|
| Buck DC-DC Converter (Silicon-proven 110 nm, 400mA, excellent efficiency) The VBKS0400T110 IP core is a Buck DC-DC switching converter that delivers up to 400 mA of load current. It includes voltage, current and clock references, power-on-reset circuitry, overcurrent protection, a temperature sensor and ESD protection. Soft-start circuitry prevents high currents during start-up, and soft-stop circuitry provides a controlled shut-down sequence during a sudden shut down or fault detection. | 概述 | |||||
| 140 mA Buck DC-DC Converter in 40 nm (VBKS0140T040) | 参考报价 | 无资料 | 无资料 | 40 nm | |
|
| Buck DC-DC Converter for Integrated PMU (Silicon-proven 40 nm, 140 mA, optimized clocking to eliminate spurious emissions for low system noise) This series of buck DC-DC converters delivers up to 140 mA of load current and features optimized clocking options to eliminate spurious emissions resulting in much lower system noise. This buck DC-DC converter is silicon-proven in a 40 nm process and is a part of our 40 nm integrated power management unit (PMU) IP core series that has been optimized for integration into Application Specific Integrated Circuits (ASICs) or Systems-on-a-Chip (SoCs), including radio frequency (RF), wireless, and narrowband Internet of Things (NB-IoT) applications. | 概述 | |||||
| Dual-Channel 12-bit 80 MSPS ADC IP in UMC 65 nm | 参考报价 | 450.000 μm^2 | 0.8 MHz | 65 nm | |
|
| ADC X is an ultra-compact and very low power analog-to-digital converter (ADC) IP. The 12-bit 80 MSPS Dual ADC includes an internal custom bandgap voltage reference. It is capable of supplying bias currents to other parallel ADCs. IP architecture is robust and can be ported to other 65 nm processes.The ADC uses fully differential pipeline architecture with custom low-disturbance digital correction technique which allows single supply bus for both digital and analog. | 概述 | |||||
| Flexsupply™ Switching Converter in 40 nm (VRDS00XXT040) | 参考报价 | 无资料 | 无资料 | 40 nm | |
|
| Flexsupply™ Switching Converter (Silicon-proven 40 nm, allows products to work at ultra-low battery levels, no external components needed) Flexsupply™ Buck/Boost DC-DC Converters: This series of buck/boost switched capacitor regulated voltage doubler IP cores allows operation across a wide range of battery voltage levels, without external components. With their low power consumption and integrated, modular design, this series of IP cores supports a broad range of industry applications with improved efficiency and flexibility. | 概述 | |||||
| 微IP | 价格 | 逻辑闸数 | 工作频率 | 工艺 | 评价 | |
|---|---|---|---|---|---|---|