客服
中
心
| 10-Bit 165 MSPS ADC in TSMC110nm | 参考报价 | 210.000 μm^2 | 165 MHz | 110 nm |  |
|
| MIC_ADC10 is compact and low power 10-bit analog-to-digital converter silicon IP. This ADC uses 1.5b/stage pipelined architecture and it is optimized for low power Figure 1. BLOCK DIAGRAM and small area. | 概述 | |||||
| 14-Bit 3 MSPS ADC in GSMC110nm | 参考报价 | 322.000 K μm^2 | 3 MHz | 110 nm | |
|
| MCR_GS110_ADC14 is compact and low power 14-bit analog-to-digital converter silicon IP. It has 20 single-end input channel selection multiplexer or 10 differential input channels selection. This ADC uses fully differential SAR architecture optimized for low The ADC is designed for high dynamic performance for input frequencies up to Nyquist rate. | 概述 | |||||
| Dual-Channel 12-bit 80 MSPS ADC IP in UMC 65 nm | 参考报价 | 450.000 μm^2 | 0.8 MHz | 65 nm | |
|
| ADC X is an ultra-compact and very low power analog-to-digital converter (ADC) IP. The 12-bit 80 MSPS Dual ADC includes an internal custom bandgap voltage reference. It is capable of supplying bias currents to other parallel ADCs. IP architecture is robust and can be ported to other 65 nm processes.The ADC uses fully differential pipeline architecture with custom low-disturbance digital correction technique which allows single supply bus for both digital and analog. | 概述 | |||||
| 12-Bit 50 MSPS ADC in IBM 180 SOI | 参考报价 | 280.000 μm^2 | 50 MHz | 180 nm | |
|
| MICIP_ADC12 is compact and low power 12-bit analog-to-digital converter silicon IP. This ADC uses 1.5b/stage pipelined architecture optimized for low power and small area. | 概述 | |||||
| 10-Bit 1MSPS Cyclic A/D Converter | 参考报价 | 300.500 K μm^2 | 10.12 Hz | 250 nm | |
|
| This IP is a 1MSPS , single supply , 10-bit analog-to-digital converter (ADC) that combines a low cost, high speed CMOS process and a novel architecture. It is a complete ADC with an on chip, high performance sample-and-hold amplifier and voltage reference. An external reference can be chosen to suit the dc accuracy and temperature drift requirements of the application. The device uses a cyclic architecture with digital error correction logic to guarantee no missing code over the full operating range. The input of this ADC is highly flexible. A truly differential input structure allows for both single-ended and differential input interface of varying span. The sample-and-hold amplifier (SHA) is equally suited for multiplexed systems that switched full-scale voltage levels in successive channels as well as sampling single-channel inputs at frequencies up to and beyond the Nyquist rate of 500KHz | 概述 | |||||
| 8-Bit 7 GSPS SAR ADC | 参考报价 | 300.000 K μm^2 | 7 GHz | 16 nm | |
|
| This IP is compact and low power 8-bit Time interleaved SAR analog-to-digital converter silicon IP.This ADC uses fully differential SAR architecture optimized for low power and small silicon area. APPLICATIONS Serdes Receiver Coherent Transceivers Data acquisition | 概述 | |||||
| 12-Bit 800KSPS Low Power SAR-ADC | 参考报价 | 无资料 | 25 MHz | 180 nm | |
|
| The SAR-ADC is a low power ADC that is implemented in Successive Approximation architecture. It can provide 12-bit resolution capability with only 3V supply voltage. It accepts an analog input range from 0 to VCC and digitizes the input at a maximum sampling frequency rate of 800KHz at 5V supply voltage. This ADC also includes MUX design to select 0 of 7 analog inputs. The power dissipation is less than 5mW with 5V power supply. This SAR-ADC is implemented in SMIC 0.18μm generic CMOS technology. | 概述 | |||||
| 14-Bit 3 MSPS ADC in GSMC110nm | 60000 点 | 32.000 K μm^2 | 3 MHz | 110 nm | |
|
| UIP_ADC14_3M_245303 is compact and low power 14-bit analog-to-digital converter silicon IP. It has 20 single-end input channel selection multiplexer or 10 differential input channels selection. This ADC uses fully differential SAR architecture optimized for low power and small area. The ADC is designed for high dynamic performance for input frequencies up to Nyquist rate. This ADC consumes 150 uA at 3 MSPS operation and occupies silicon area of 0.32 mm2 . The ADC has high immunity to substrate noise and is ideal for SoC integration. APPLICATIONS General purpose data acquisition Battery monitory system Temperature monitory system | 概述 | |||||
| [110nm]10-bit 80 MSPS ADC IP | 60000 点 | 210.000 K μm^2 | 80 MHz | 110 nm | |
|
| UIP_ADC10_80M_183288 is an ultra-compact and very low power analog-to-digital converter (ADC) silicon IP. The 10-bit 80 MSPS ADC includes an internal custom bandgap voltage reference. It is capable of supplying bias currents to other parallel ADCs. The ADC uses fully differential pipeline architecture with custom low-disturbance digital correction technique which allows single supply bus for both digital and analog. The ADC is designed for high dynamic performance for input frequencies up to Nyquist. This makes the IP perfectly suitable for video, imaging and communication appliances. The IP is available in different metal options as well as deep N-well (DNW) option for SoC with high level of substrate noise. It consumes only 24mW at 80 MSPS operation and requires silicon area of 0.21 mm2. The IP does not require any external decoupling and is ideal for integration in mixed-signal systems. The output data of ADC is available in 2’s complement format. UIP_ADC10_80M_183288 can be used in the following applications: ‧Digital imaging ‧TV/Video ‧Wireless LAN ‧Rx communication channel | 概述 | |||||
| [110nm] 10-bit 165 MSPS ADC IP | 70000 点 | 210.000 K μm^2 | 165 MHz | 110 nm | |
|
| UIP_ADC10_165M_213779 is an ultra-compact and very low power analog-to-digital converter (ADC) silicon IP. The 10-bit 165 MSPS ADC includes an internal custom bandgap voltage reference. It is capable of supplying bias currents to other parallel ADCs. The ADC uses fully differential pipeline architecture with custom low-disturbance digital correction technique which allows single supply bus for both digital and analog. The ADC is designed for high dynamic performance for input frequencies up to Nyquist. This makes the IP perfectly suitable for video, imaging and communication appliances. The IP is available in different metal options as well as deep N-well (DNW) option for SoC with high level of substrate noise. It consumes only 48mW at 165 MSPS operation and requires silicon area of 0.21 mm2. The IP does not require any external decoupling and is ideal for integration in mixed-signal systems. The output data of ADC is available in 2’s complement format. UIP_ADC10_165M_213779 can be used in the following applications: ‧Digital imaging ‧TV/Video ‧Wireless LAN ‧Rx communication channel ‧IOT | 概述 | |||||
| 微IP | 价格 | 逻辑闸数 | 工作频率 | 工艺 | 评价 | |
|---|---|---|---|---|---|---|