DSP-BASED ETHERNET TRANSCEIVER in UMC 28nm HPC+ |
参考报价 |
无资料 |
25 MHz |
28 nm |
|
|
A 28nm DPS-based Gigabit Ethernet transceiver.
Highly intergrated 1000BASE-T, 100BASE-TX, 100BASE-FX and 10BASE-Te.
Fully compliant with 100BASE-FX IEEE 802.2u standard
|
概述 |
PCI Express Gen4 PHY IP in 28nm HPC+ |
参考报价 |
无资料 |
25 MHz |
28 nm |
|
|
The Peripheral Component Interconnect Express (PCIe) x4 PHY is compliant with PCIe 4.0 Base Specification with support of PIPE v4.4 inter- face spec. Lower power consumption is achieved due to support of addition- al PLL control, reference clock control, and embedded power gating control. Also, since aforementioned low power mode setting is configurable, the PHY is widely applicable for various scenarios under different consideration of power consumption.
|
概述 |
PLL 800M UMC 28 nm logic and Mixed-Mode HPC process |
参考报价 |
230.000 μm^2 |
800 MHz |
28 nm |
|
|
It is a 28-nm low-power spread spectrum clock generator that supports an operating frequency ranging from 400 MHz to 800 MHz and from 200 MHz to 400 MHz.
This SSCG is programmable to perform the frequency synthesis and spread-spectrum function for the Electro Magnetic Interference (EMI) reduction in various ASIC designs.
|
概述 |
PLL 1600M UMC 28 nm logic and Mixed-Mode HPC process |
参考报价 |
270.000 μm^2 |
1.6 GHz |
28 nm |
|
|
A Phase-Locked Loop (PLL) with an operating frequency ranging from 200 MHz to 1600 MHz.
This PLL is designed with the UMC 28 nm logic and Mixed-Mode HPC process.
It can be integrated into a chip to generate a high-speed clock.
The embedded divide-by-4 loop divider allows users to boost the output frequency of up to 1600 MHz.
|
概述 |
PLL 2000M UMC 28 nm logic and Mixed-Mode HPC process |
参考报价 |
230.000 μm^2 |
2 GHz |
28 nm |
|
|
A Phase-Locked Loop (PLL) circuit used to generate the high-speed clock with an operating frequency up to 2000 MHz.
This PLL is designed by using the UMC 28 nm logic and Mixed-Mode HPC process.
It can be integrated into a chip to generate an accurate clock.
|
概述 |
PLL 1300M UMC 28 nm logic and Mixed-Mode HPC process |
参考报价 |
109.850 K μm^2 |
50 MHz |
28 nm |
|
|
It is used to generate a stable, high-speed clock from an external slower clock signal. It integrates one Voltage-Controlled Oscillator (VCO), one Phase-Frequency Detector (PFD), one Low-Pass Filter (LPF), one 8-bit programmable divider, and other associated support circuitries. This PLL supports an operating voltage ranging from 0.81 V to 0.99 V with an operating junction temperature ranging between -40 °C and 125 °C. This IP uses the input operating frequency of PFD ranging from 6 MHz to 25 MHz and generates the output frequency ranging from 25 MHz to 1300 MHz.
The jitter performance of a PLL is highly dependent on the floor plan of ASIC. Because PLL is a sensitive cell when integrated into an ASIC design, the best way to maximize its capacity is to keep PLL away from the noisy blocks in the core region, such as the memory block and the high-driving logic circuit, and the I/O region, such as the high-driving I/O. This PLL must be placed around the I/O area. Providing sufficient space between this PLL and the noisy blocks is a simple and effective approach to reduce the coupled substrate noise.
|
概述 |
PLL 3000M UMC 28 nm logic and Mixed-Mode HPC process |
参考报价 |
92.400 K μm^2 |
27 MHz |
28 nm |
|
|
It generates a stable high-speed clock from an external slower reference clock signal. It integrates a Voltage-Controlled Oscillator (VCO), a Phase-Frequency Detector (PFD), a Low-Pass Filter (LPF), a 9-bit programmable loop divider, a 2-bit programmable pre-divider and associated support circuitry. This PLL is designed by using the UMC 28 nm logic and Mixed-Mode HPC process, and it supports an operating voltage ranging from 0.81 V to 0.99 V with an operating junction temperature ranging between -40 °C and 125 °C. It accepts FREF frequency ranging from 6 MHz to 27 MHz and generates the output frequency up to 3000 MHz.
|
概述 |
8-Bit 7 GSPS SAR ADC |
参考报价 |
300.000 K μm^2 |
7 GHz |
16 nm |
|
|
This IP is compact and low power 8-bit Time interleaved SAR analog-to-digital converter silicon IP.This ADC uses fully differential SAR architecture optimized for low power and small silicon area.
APPLICATIONS
Serdes Receiver
Coherent Transceivers
Data acquisition
|
概述 |
MIPI M-PHY Gear 4 IP in TSMC 12nm FFC |
参考报价 |
无资料 |
11 GHz |
12 nm |
|
|
MIPI M-PHY Gear 4 IP is compliant with the latest MIPI.
Alliance M-PHY v4.1 Specification, UniPro v1.8 Specification, and Universal Flash Storage (UFS) v3.0 Specification. A serial interface technology with high bandwidth capabilities and supports HS Gear4 rates up to 11.6Gbps, which is particularly developed for mobile applications to obtain low pin count combined with very good power efficiency. The MIPI M-PHY Gear 4 IP compliant to the RMMI interface which allows UniPro controller and UFS Controller.
|
概述 |
PCI Express Gen4 PHY IP in TSMC 12nm FFC |
参考报价 |
无资料 |
25 MHz |
12 nm |
|
|
The Peripheral Component Interconnect Express (PCIe) x4 PHY is compliant with PCIe 4.0 Base Specification with support of PIPE v4.4 inter- face spec. Lower power consumption is achieved due to support of addition- al PLL control, reference clock control, and embedded power gating control. Also, since aforementioned low power mode setting is configurable, the PHY is widely applicable for various scenarios under different consideration of power consumption.
|
概述 |