客服
中
心
| Motion-adaptive Video Deinterlacer | 参考报价 | 无资料 | 200 MHz | 无资料 |  |
|
| The IP Core is a studio quality 24-bit RGB video deinterlacer capable of generating progressive output video at any resolution up to 216 x 216 pixels. The design is fully programmable and supports any desired interlaced video format. The design allows for three possible deinterlacing schemes. These are: weave, bilinear interpolation or motion-adaptive interpolation. The weave approach applies no filtering and may be useful to obtain a 'raw' interlaced format for subsequent processing. The other two methods are classed as 'inter-field' interpolation methods as spatial filtering is performed between both odd and even fields to achieve a clean and progressive output. The relative merits and disadvantages of each scheme are discussed further into the document. The deinterlacer core features a fully integrated video frame buffer. This buffer is completely 'elastic' and will dynamically skip and/or repeat frames depending on the input and output frame rates. All frame buffer management is handled internally with the provision of a simple memory interface for storing odd and even fields off-chip. The memory interface is 128-bits wide and is completely generic. All memory transfers are sequential bursts of N x 128-bit words and may be adapted for connection to a variety of memory types such as SDRAM, DDR2 or DDR3. Application Digital TV set-top boxes. Industrial imaging. Automotive, home and personal media solutions Conversion of 'legacy' SDTV formats to HDTV video formats Generating progressive RGB video via inexpensive PAL/NTSC decoder chips Studio-quality video de-interlacing | 概述 | |||||
| Multi-format Video Deinterlacer | 参考报价 | 无资料 | 200 MHz | 无资料 | |
|
| The IP Core is a high quality 24-bit RGB video deinterlacer capable of generating progressive output video at up to 4096x4096 pixels in resolution. The design is fully customizable, supporting any desired interlaced video format. The deinterlacer allows for three possible filter algorithms - either BOB, ELA or LCI. All three methods are 'intra-field' methods that perform spatial filtering within the same field. For this reason, the output video is not subject to combing or tearing which is characteristic of a traditional 'weave' approach. Each algorithm has it relative merits in terms of image quality and hardware complexity. In particular, the enhanced LCI algorithm provides excellent all-round performance with reduced image softening and crisp clean edges. Application Conversion of 'legacy' SDTV formats to HDTV video formats Generating progressive RGB video via inexpensive PAL/NTSC decoder chips High-quality video de-interlacing without the overhead of a frame buffer Digital TV set-top boxes and home media solutions | 概述 | |||||
| JPEG Encoder | 参考报价 | 无资料 | 250 MHz | 130 nm | |
|
| This IP core has been developed to be a complete standards compliant JPEG / MJPEG Hardware Compressor / Encoder. The data interfaces in the JPEG Encoder IP Core (JPEGE) use the AXI industry standard. The Master I/O data interfaces use an AXI3 bus, forward compatible with AXI4 interconnects. In order to let you assess the properties of the on-the-fly selectable quality setting, please use the slider below the image in order to see the final compressed image and compression ratio. The JPEG Encoder IP Core has a real throughput of two compressed pixels every three clock cycles at any compression ratio for a chroma subsampling of 4:2:0. To calculate the throughput for your platform. | 概述 | |||||
| JPEG Decoder | 参考报价 | 无资料 | 250 MHz | 130 nm | |
|
| This JPEG Decoder IP core has been developed to be a complete standards compliant JPEG / MJPEG Hardware Decompressor / Decoder. When decoding JPEG images, pixel throughput can not be fixed for compressed JPEGs of arbitrary quality, as it depends on the compression ratio (bits needed to encode one pixel). To circumvent this limitation JPEG Decoder IP features a dual pixel component pipeline, allowing for greater decoding speeds. | 概述 | |||||
| Digital Video Scaler | 参考报价 | 无资料 | 250 MHz | 无资料 | |
|
| The IP Core is a studio quality video scaler capable of generating interpolated output images from 16 x 16 up to 216 x 216 pixels in resolution. The architecture permits seamless scaling (either up or down) depending on the chosen scale factor. Internally, the scaler uses a 24-bit accumulator and a bank of polyphase FIR filters with 16 phases or interpolation points. All filter coefficients are programmable, allowing the user to define a wide range of filter characteristics. Pixels flow in and out of the video scaler in accordance with the valid-ready pipeline protocol. Pixels are transferred into the scaler on a rising clock-edge when pixin_val is high and pixin_rdy is high. As such, the pipeline protocol allows both input and output interfaces to be stalled independently. The scaler is partitioned into a horizontal scaling module in series with a vertical scaling module . Application Support for the latest generation video formats with resolutions of 4K and above Video scaling for flat panel displays, portable devices, video consoles, video format converters, set-top boxes, digital TV etc. Conversion of all standard and custom video resolutions such as HD720P to HD1080P, XGA to VGA etc. | 概述 | |||||
| Bilinear Video Scaling Engine | 参考报价 | 无资料 | 250 MHz | 无资料 | |
|
| This IP is a very high quality video scaler capable of generating interpolated output images from 16x16 up to 216 x 216 pixels in resolution. The architecture permits seamless scaling (either up or down) depending on the chosen scale factor. Internally, the scaler uses a 24-bit accumulator and a bank of polyphase FIR filters with 16 phases or interpolation points. All filter coefficients are programmable, allowing the user to define a wide range of filter characteristics. Pixels flow in and out of the scaling engine in accordance with the valid-ready pipeline protocol.As such, the pipeline protocol allows both input and output interfaces to be stalled independently. The scaler is partitioned into a horizontal scaling section in series with avertical scaling section. Application Conversion of popular video formats to any other resolution such as VGA to XGA, SVGA to HD1080 etc. Picture in Picture (PiP) applications High quality 24-bit RGB/YCbCr video scaling | 概述 | |||||
| Digital Video overlay module | 参考报价 | 无资料 | 250 MHz | 无资料 | |
|
| This IP is a highly versatile video multiplexer that allows one video stream to be inserted over another. By cascading a series of video overlay modules together, any number of video sources may be multiplexed together. The module supports input video streams of any resolution or aspect ratio up to 216 x 216 pixels in size. Video overlay parameters may be changed on a frame-by-frame basis to dynamically change the size and position of the video overlay. Pixels and syncs flow in and out of the video overlay module in accordance with the valid-ready pipeline protocol. The pipeline protocol allows both input and output interfaces to be stalled independently. In addition, the overlay module supports a number of blending operations including an 8-bit alpha channel and bitwise AND, OR and XOR functions. Application Network and Tactical operations centres Digital-video special effects Broadcast TV and film production CCTV and security camera systems | 概述 | |||||
| Video Frame Buffer | 参考报价 | 无资料 | 300 MHz | 无资料 | |
|
| VID_FB is a high-speed multi-format video frame buffer that asynchronously samples an input video stream and buffers it in an external memory. Output pixels are read out of the buffer and synchronised to the system clock domain. The VID_FB will automatically adapt to different input and output frame rates. If the input frame rate is too high, then the VID_FB will cleanly drop or 'skip' an input frame. Likewise, if the output frame rate is higher than the input frame rate, then frames will be repeated 3 . The result is a system that seamlessly adapts to the different frame rates at the input and output of the VID_FB. Applications Buffering video frames in external memory Real-time digital video applications Genlocking of multiple video sources | 概述 | |||||
| Color-space Converter | 参考报价 | 无资料 | 400 MHz | 无资料 | |
|
| This IP is a fully pipelined color-space converter that converts pixels between the RGB and YCbCr color spaces. In total, the IP Core package contains two distinct modules – one module that converts from 24-bit RGB to 30-bit 4:4:4 YCbCr and the other that performs the reciprocal operation from 4:4:4 YCbCr to RGB. Application Digital video and image processing | 概述 | |||||
| Video Timing Generator | 参考报价 | 无资料 | 400 MHz | 无资料 | |
|
| The IP Core is a fully configurable video timing generator with the ability to support any video resolution up to 216 x 216 pixels in size. The module is compatible with a wide range of video DACs, CODECs and transceivers and provides a flexible solution for displaying digital or analogue video on an external TV, monitor or flat panel display. The module is capable of clock speeds in excess of 400 MHz on some FPGA platforms, making it ideal for the latest generation HD and UHD video solutions. After resynchronizing the input pixels to the pixel-clock domain , the controller locks to the first frame (or field) of video. Once frame-lock is achieved, pixels are supplied on demand to the video timing control unit. This module generates the correct RGB video, sync and blanking information depending on the chosen timing parameters. Application Legacy (SD) and analogue video applications Digital TV and multimedia solutions HD, UHD and SUHD next generation digital video | 概述 | |||||
| 微IP | 价格 | 逻辑闸数 | 工作频率 | 工艺 | 评价 | |
|---|---|---|---|---|---|---|