客服
中
心
| Chroma Resampler | 参考报价 | 无资料 | 400 MHz | 无资料 |  |
|
| The IP Core is a fully pipelined chroma resampler that converts pixels between 4:4:4 and 4:2:2 formats in the YCbCr colour space. In total, the IP Core package contains two distinct modules – one module that converts from 4:4:4 to 4:2:2 and the other that performs the reciprocal operation from 4:2:2 to 4:4:4. Pixels flow into the design in accordance with the valid ready pipeline protocol. Input pixels and syncs are sampled on the rising edge of clk when PIX_VALID and PIX_READY are both high. At the output interface, pixels and syncs are sampled on a the rising edge of clk when POUT_VALID and POUT_READY are high. The input and output sync signals are coincident with the first pixel of a frame and the first pixel of a line. These are useful to identify the video frame and line boundaries. Application Digital video and image processing Interfacing between different video processing and video transceiver ICs that use different colour formats | 概述 | |||||
| 10-Bit 1MSPS Cyclic A/D Converter | 参考报价 | 300.500 K μm^2 | 10.12 Hz | 250 nm | |
|
| This IP is a 1MSPS , single supply , 10-bit analog-to-digital converter (ADC) that combines a low cost, high speed CMOS process and a novel architecture. It is a complete ADC with an on chip, high performance sample-and-hold amplifier and voltage reference. An external reference can be chosen to suit the dc accuracy and temperature drift requirements of the application. The device uses a cyclic architecture with digital error correction logic to guarantee no missing code over the full operating range. The input of this ADC is highly flexible. A truly differential input structure allows for both single-ended and differential input interface of varying span. The sample-and-hold amplifier (SHA) is equally suited for multiplexed systems that switched full-scale voltage levels in successive channels as well as sampling single-channel inputs at frequencies up to and beyond the Nyquist rate of 500KHz | 概述 | |||||
| Real-Time-Clock | 参考报价 | 无资料 | 32 KHz | 130 nm | |
|
| The RTC is a TSMC 0.13μm Real-Time-Clock cell that provides multiple clocks. This RTC provides an operating voltage range of 2.7V ~ 3.3V, and an operating junction temperature range of -40˚ ~ 125℃. | 概述 | |||||
| 4.2V-to-1.2V DC/DC Converter | 参考报价 | 40.000 K μm^2 | 1 MHz | 130 nm | |
|
| The DCDC12 is a 0.13μm DC to DC converter in buck mode cell that converters input voltage to a smaller output voltage. The output voltage can be programmed from 1.05V to 1.3V.An external 10uH inductor is necessary. | 概述 | |||||
| 4.2V-to-1.8V DC/DC Converte | 参考报价 | 40.000 K μm^2 | 1 Hz | 130 nm | |
|
| The DCDC18 is a 0.13μm DC to DC converter in buck mode cell that converters input voltage to a smaller output voltage. The output voltage can be programmed from 1.65V to 1.9V.An external 10uH inductor is necessary. | 概述 | |||||
| PLL with Multiple Output Frequency | 参考报价 | 40.000 K μm^2 | 12.156 MHz | 130 nm | |
|
| The PLL is a 0.13μm Phase-Locked Loop (PLL) cell that provides a clock multiplier that can generate a stable 48M/96M/120MHz/156MHz clock from a 12MHz clock source. This is a “generic” PLL which integrates the Voltage-Controlled Oscillator (VCO), Phase-Frequency Detector, Low Pass Filter, Loop Divider and Post Divider. This PLL provides an operating voltage range of 1.08V ~ 1.32V, and an operating junction temperature range of -40˚ ~ 125℃. | 概述 | |||||
| 4K/8k capable JPEG Encoder with scalable | 参考报价 | 无资料 | 无资料 | 无资料 | |
|
| This JPEG compression IP core supports the Baseline Sequential DCT and the Ex- tended Sequential DCT modes of the ISO/IEC 10918-1 standard. It implements a scalable, ultra-high-performance, ASIC or FPGA, hardware JPEG encoder that can compress high pixel rate video using significantly fewer silicon resources and less pow- er than encoders for video compression standards such as HEVC/H,265, DSC, AVC/H.264, or JPEG200. The JPEG-MT-V Encoder produces compressed JPEG images and the video payload for Motion-JPEG container formats. It accepts images with up to 12-bit color samples and up to four color components, in all widely-used color subsampling formats. Depending on its configuration, the encoder processes from two to 32 color samples per clock cycle, enabling it to compress UHD (4K/8K) video and/or very high frame vid- eo. Once programmed, the easy-to-use encoder requires no assistance from a host pro- cessor to compress an arbitrary number of frames. SoC integration is straightforward thanks to standardized AMBA® interfaces: AXI Streaming for pixel and compressed da- ta, and a 32-bit APB slave interface for registers access. Users can optionally insert timestamps or other metadata in the compressed stream using a dedicated AXI Stream- ing interface. | 概述 | |||||
| 8/12-bit JPEG decoder for ASIC and FPGA with scalable | 参考报价 | 无资料 | 无资料 | 无资料 | |
|
| This JPEG decompression IP core supports the Baseline Sequential DCT and Extend- ed Sequential DCT modes of the ISO/IEC 10918-1 standard. It implements a scalable, ultra-high-performance, ASIC or FPGA, hardware JPEG decoder that handles extreme- ly high pixel rates. The JPEG-ST-V Decoder decompresses JPEG images and the video payload for Mo- tion-JPEG container formats. It accepts compressed streams of images with 8- or 12-bit color samples and up to four color components, in all widely-used color subsampling formats. Depending on its configuration, the decoder processes from two to 32 color samples per clock cycle. Its high throughput capabilities are best exploited when decompressing streams produced by the JPEG-MT-V Encoder Core. This Encoder-Decoder pair pro- vide an extremely cost effective solution for streaming or archiving UHD (4K/8K) video, or very high frame rates at lower resolutions. Once programmed, the easy-to-use decoder operates on a standalone basis, parsing marker segments and decompressing coded data with no assistance from a host pro- cessor. The decoder reports the image format (i.e., resolution, subsampling format, and color sample-depth) to the system, so that the decoded images are properly further processed and/or displayed. | 概述 | |||||
| Ultra-low Power Voltage Reference in 40 nm (VVR060LT040) | 参考报价 | 无资料 | 无资料 | 40 nm | |
|
| Voltage Reference for Integrated PMU (Silicon-proven 40 nm, low-power for IoT with quiescent current of <0.9 μA) This series of fully-integrated low power voltage references generates a 0.6 V output voltage and supports an input from 2.8 to 4.2 V. They operate at an ultra-low quiescent current of < 0.9 μA. These voltage references are silicon-proven in a 40 nm process and are a part of our 40 nm integrated power management unit (PMU) IP core series that has been optimized for integration into Application Specific Integrated Circuits (ASICs) or Systems-on-a-Chip (SoCs), including radio frequency (RF), wireless, and narrowband Internet of Things (NB-IoT) applications. | 概述 | |||||
| Ultra-High Accuracy Bandgap Reference in 130 nm (VBRS1000NT130) | 参考报价 | 无资料 | 无资料 | 130 nm | |
|
| ACCUREF™ Bandgap Reference (Silicon-proven 40 nm, low-power, low-noise, ultra-precise single-digit mV accuracy, no external components required) ACCUREF™ Voltage and Current References: This series of low-power, low-noise IP cores generates a precise, adjustable reference voltage with single-digit millivolt (mV) accuracy over a wide temperature range without external components. With their unique design that improves upon current products by allowing the systems to operate with ultra-low levels of power consumption without sacrificing accuracy or noise performance, our family of ACCUREF™ voltage and current reference IP cores support a broad range of industry applications with improved efficiency and remarkable area savings overall. | 概述 | |||||
| 微IP | 价格 | 逻辑闸数 | 工作频率 | 工艺 | 评价 | |
|---|---|---|---|---|---|---|