10-Bit 1MSPS Cyclic A/D Converter |
参考报价 |
300.500 K μm^2 |
10.12 Hz |
250 nm |
|
|
This IP is a 1MSPS , single supply , 10-bit analog-to-digital converter (ADC) that combines a low cost, high speed CMOS process and a novel architecture. It is a complete ADC with an on chip, high performance sample-and-hold amplifier and voltage reference. An external reference can be chosen to suit the dc accuracy and temperature drift requirements of the application. The device uses a cyclic architecture with digital error correction logic to guarantee no missing code over the full operating range.
The input of this ADC is highly flexible. A truly differential input structure allows for both single-ended and differential input interface of varying span. The sample-and-hold amplifier (SHA) is equally suited for multiplexed systems that switched full-scale voltage levels in successive channels as well as sampling single-channel inputs at frequencies up to and beyond the Nyquist rate of 500KHz
|
概述 |
12-Bit 320MPS IQ DAC in TSMC40LP |
70000 点 |
250.000 K μm^2 |
320 MHz |
180 nm |
|
|
UIP_DAC12X2_320M_922687 is compact and low power 12-bit digital-to-analog converter silicon IP in IBM 180nm SOI process. It features two channel current steering DAC.
This IQ DAC IP is optimized for low power and small area. At 320 MHz conversation rate, it only consumes 63mW and occupies silicon area of 0.25 mm2.
APPLICATIONS
WiFi / LTE / WiMax
Wireless MIMO
Digital Video
Communication Transmit
|
概述 |
12-Bit 800KSPS Low Power SAR-ADC |
参考报价 |
无资料 |
25 MHz |
180 nm |
|
|
The SAR-ADC is a low power ADC that is implemented in Successive Approximation architecture. It can provide 12-bit resolution capability with only 3V supply voltage. It accepts an analog input range from 0 to VCC and digitizes the input at a maximum sampling frequency rate of 800KHz at 5V supply voltage. This ADC also includes MUX design to select 0 of 7 analog inputs. The power dissipation is less than 5mW with 5V power supply. This SAR-ADC is implemented in SMIC 0.18μm generic CMOS technology.
|
概述 |
Oscillator - RC22MHz |
参考报价 |
无资料 |
22 MHz |
180 nm |
|
|
The RC_OSC22M is a low power consumption internal Resistor/Capacitor oscillator with trimming operating frequency. This OSC needs input Bandgap reference voltage to maintain stable operating frequency and decrease power supply effects. The RC-oscillator cell is useful for applications that require an oscillator that utilizes non-external components and has a relaxed frequency tolerance. An enable / disable mode is provided to disable the oscillator. When the oscillator is in the disable mode, the output (CLK22M) goes to a logic level low. It is processed using SMIC’s 0.35μm logic process with an operating supply voltage range of 2.0V ~ 5.5V and a junction temperature range of -40˚ ~ 125˚C.
|
概述 |
12-Bit 50 MSPS ADC in IBM 180 SOI |
参考报价 |
280.000 μm^2 |
50 MHz |
180 nm |
|
|
MICIP_ADC12 is compact and low power 12-bit analog-to-digital converter silicon IP. This ADC uses 1.5b/stage pipelined architecture optimized for low power and small area.
|
概述 |
300 mA Capless LDO in 180 nm (VLDS0300RNM180) |
参考报价 |
无资料 |
无资料 |
180 nm |
|
|
Noise Quencher® Capless LDO (Silicon-proven 180 nm, 300 mA, excellent supply noise rejection and fast settling)
Noise Quencher® LDOs: This series of low-power, fully-integrated low dropout (LDO) voltage regulators uses our patented Noise Quencher® Technology to provide best-in-class dynamic performance and noise rejection. The IP cores are unconditionally stable across a wide range of load currents and load capacitances and also do not require external components, thus saving package pins and valuable PC board space. These LDOs are optimized for stand-alone power management integrated circuit (PMIC) ASSPs and other analog and digital applications.
|
概述 |
12-Bit 320MSPS IQ DAC in IBM SOI 180nm |
参考报价 |
254.000 K μm^2 |
320 MHz |
180 nm |
|
|
MIC_DAC12X2 is compact and low power 12-bit digital-to-analog converter
silicon IP in IBM 180nm SOI process. It features two channel current steering DAC.
|
概述 |
10-bit 165 MSPS ADC IP in 130 nm |
70000 点 |
210.000 K μm^2 |
165 MHz |
130 nm |
|
|
UIP_ADC10_165M_166413 is an ultra-compact and very low power analog-to-digital converter (ADC) silicon IP. The 10-bit 165 MSPS ADC includes an internal custom bandgap voltage reference. It is capable of supplying bias currents to other parallel ADCs.
The ADC uses fully differential pipeline architecture with custom low-disturbance digital correction technique which allows single supply bus for both digital and analog. The ADC is designed for high dynamic performance for input frequencies up to Nyquist. This makes the IP perfectly suitable for video, imaging and communication appliances.
The IP is available in different metal options as well as deep N-well (DNW) option for SoC with high level of substrate noise. It consumes only 48mW at 165 MSPS operation and requires silicon area of 0.21 mm2. The IP does not require any external decoupling and is ideal for integration in mixed-signal systems. The output data of ADC is available in 2’s complement format.
UIP_ADC10_165M_166413 can be used in the following applications:
‧Digital imaging
‧TV/Video
‧Wireless LAN
‧Rx communication channel
‧IOT
|
概述 |
10-bit 80 MSPS ADC IP in 130 nm |
60000 点 |
210.000 K μm^2 |
80 MHz |
130 nm |
|
|
UIP_ADC10_80M_156287 is an ultra-compact and very low power analog-to-digital converter (ADC) silicon IP. The 10-bit 80 MSPS ADC includes an internal custom bandgap voltage reference. It is capable of supplying bias currents to other parallel ADCs.
The ADC uses fully differential pipeline architecture with custom low-disturbance digital correction technique which allows single supply bus for both digital and analog. The ADC is designed for high dynamic performance for input frequencies up to Nyquist. This makes the IP perfectly suitable for video, imaging and communication appliances.
The IP is available in different metal options as well as deep N-well (DNW) option for SoC with high level of substrate noise. It consumes only 24mW at 80 MSPS operation and requires silicon area of 0.21 mm2. The IP does not require any external decoupling and is ideal for integration in mixed-signal systems. The output data of ADC is available in 2’s complement format.
UIP_ADC10_80M_156287 can be used in the following applications:
‧Digital imaging
‧TV/Video
‧Wireless LAN
‧Rx communication channel
|
概述 |
4.2V-to-1.2V DC/DC Converter |
参考报价 |
40.000 K μm^2 |
1 MHz |
130 nm |
|
|
The DCDC12 is a 0.13μm DC to DC converter in buck mode cell that converters input voltage to a smaller output voltage. The output voltage can be programmed from 1.05V to 1.3V.An external 10uH inductor is necessary.
|
概述 |