客服
中
心
| PLL 800M UMC 28 nm logic and Mixed-Mode HPC process | 参考报价 | 230.000 μm^2 | 800 MHz | 28 nm |  |
|
| It is a 28-nm low-power spread spectrum clock generator that supports an operating frequency ranging from 400 MHz to 800 MHz and from 200 MHz to 400 MHz. This SSCG is programmable to perform the frequency synthesis and spread-spectrum function for the Electro Magnetic Interference (EMI) reduction in various ASIC designs. | 概述 | |||||
| PLL 2000M UMC 28 nm logic and Mixed-Mode HPC process | 参考报价 | 230.000 μm^2 | 2 GHz | 28 nm | |
|
| A Phase-Locked Loop (PLL) circuit used to generate the high-speed clock with an operating frequency up to 2000 MHz. This PLL is designed by using the UMC 28 nm logic and Mixed-Mode HPC process. It can be integrated into a chip to generate an accurate clock. | 概述 | |||||
| 10-Bit 165 MSPS ADC in TSMC110nm | 参考报价 | 210.000 μm^2 | 165 MHz | 110 nm | |
|
| MIC_ADC10 is compact and low power 10-bit analog-to-digital converter silicon IP. This ADC uses 1.5b/stage pipelined architecture and it is optimized for low power Figure 1. BLOCK DIAGRAM and small area. | 概述 | |||||
| Low power oscillator | 12000 点 | 100.100 μm^2 | 32 KHz | 40 nm | |
|
| OSC32K is designed for 40nm advance process with 1.2v to 3.3v wide power(VDD) range. | 概述 | |||||
| Rapid IO PHY in 65nm | 参考报价 | 2.295 μm^2 | 25 Hz | 65 nm | |
|
| The IP is designed for chips that perform high bandwidth data communication while operating at low power consumption. It can also be used in any serial interface where timing and electrical specification can be satisfied. This IP has four individual Transmitter (TX) and Receiver (RX) channels, and one common phase lock loop (PLL). | 概述 | |||||
| 电流式感测器尿酸浓度检测 | 参考报价 | 无资料 | 无资料 | 无资料 | |
|
| 本电路为低功耗之电流输入电流输出，能感测的电流范围因输入端为低阻抗的关系，能量测的电流范围能从250pA~50uA。本电路共有48颗MOS，其中包含一个辅导放大器(OTA)、自体偏压放大器(OPA)与9颗低功率MOS，运用电流镜架构把输入电流复制到输出端，电路稳定度也不会随着溶液之等效阻抗而明显变动，使其能更稳定运作。利用电化学的安培法来量测葡萄糖氧化反应所产生的电流信号，输入电流式读出电路，做电流讯号处理，后端再以微控器处理电路输出讯号，并做数值的转换，转换成血糖值，最后显示在LCD上，完成一血糖机雏形。 应用领域: 血糖 尿酸 胆固醇 酒精浓度 专利取得 : 美国 中华民国 | 概述 | |||||
| 1024X8 Flash | 参考报价 | 无资料 | 无资料 | 无资料 | |
|
| Nor Flash can be used for code storage and data storage with general purpose MCUs and touch panel controller applications.Application in embedded system. No additional Mask required on Standard CMOS process | 概述 | |||||
| ASK/OOK Transmitter (R433) | 参考报价 | 无资料 | 无资料 | 无资料 | |
|
| The IP is a high performance, easy to use, ASK Transmitter IP for remote wireless applications in the 300 to 450MHz frequency band. This transmitter IP is a true “data-in, antenna-out” monolithic device. R433 has three strong attributes: power delivery, operating voltage and operating temperature. In terms of power, the R433 is capable of delivering +10 dBm into a 50Ω load. This power level enables a small form factor transmitter (lossy antenna) such as a key fob transmitter to operate near the maximum limit of transmission regulations. In terms of operating voltage, the R433 operates from 1.8V to 3.6V. Application Garage Door Openers Remote Controls Home Automation Sensor Networks Security System Fan Controllers | 概述 | |||||
| Oscillator - RC22MHz | 参考报价 | 无资料 | 22 MHz | 180 nm | |
|
| The RC_OSC22M is a low power consumption internal Resistor/Capacitor oscillator with trimming operating frequency. This OSC needs input Bandgap reference voltage to maintain stable operating frequency and decrease power supply effects. The RC-oscillator cell is useful for applications that require an oscillator that utilizes non-external components and has a relaxed frequency tolerance. An enable / disable mode is provided to disable the oscillator. When the oscillator is in the disable mode, the output (CLK22M) goes to a logic level low. It is processed using SMIC’s 0.35μm logic process with an operating supply voltage range of 2.0V ~ 5.5V and a junction temperature range of -40˚ ~ 125˚C. | 概述 | |||||
| Ultra-low Power Voltage Reference in 40 nm (VVR060LT040) | 参考报价 | 无资料 | 无资料 | 40 nm | |
|
| Voltage Reference for Integrated PMU (Silicon-proven 40 nm, low-power for IoT with quiescent current of <0.9 μA) This series of fully-integrated low power voltage references generates a 0.6 V output voltage and supports an input from 2.8 to 4.2 V. They operate at an ultra-low quiescent current of < 0.9 μA. These voltage references are silicon-proven in a 40 nm process and are a part of our 40 nm integrated power management unit (PMU) IP core series that has been optimized for integration into Application Specific Integrated Circuits (ASICs) or Systems-on-a-Chip (SoCs), including radio frequency (RF), wireless, and narrowband Internet of Things (NB-IoT) applications. | 概述 | |||||
| 微IP | 价格 | 逻辑闸数 | 工作频率 | 工艺 | 评价 | |
|---|---|---|---|---|---|---|